THIS LISTING IS FOR A VINTAGE MM? HINGED TEARDROP POLISHED BRONZE BOW LIGHT, THIS IS NICE IN THAT IT COMES WITH A GLASS LENS. I ALSO HAVE A PAIR OF RUNNING LIGHTS IN THE SAME DESIGN FROM THE SAME BOAT IN A SEPARATE LISTING, (SEE LAST PHOTO) THIS LISTING IS ONLY FOR THE BOW LIGHT. I JUST INSTALLED A NEW BULB SOCKET, AND VERY BRIGHT LOW DRAW (2 WATT) LED BULB. THIS IS BEAUTIFULLY ENGINEERED. I HAVEN’T SEEN THIS TYPE DESIGN IN A HINGED DESIGN BEFORE AND IT OPEN/CLOSE WELL AND SCREWS DOWN TIGHT, THE SCREW IS RETAINED BY A SPECIAL WASHER ON THE INSIDE. THE GLASS LENS SCREWS IN WITH A RUBBER GASKET, WHICH SHOULD MAKE IT COMPLETELY WEATHER TIGHT ON THE EXTERIOR. THE INTERIOR MALE RECEPTACLE THAT GOES THROUGH YOUR CABIN SIDE HAS ANOTHER WEATHER TIGHT FLANGE THAT HAS A HEAVY RUBBER GROMET ON THE SEAT OF THE FEMALE END. I DON’T KNOW THAT YOU NEED A WEATHER PROOF INTERIOR SEAL BUT IF YOU WERE TO SEAL THE WIRE LEAD IN YOU WOULD HAVE IT WEATHERPROOF INSIDE AND OUT. THE TREADED PORTION THAT GOES THROUGH THE CABIN SIDE IS WIDE ENOUGH TO ACCOMMODATE UP TO 3/4 AND STILL BE ABLE T. O FIT ON THE WEATHER PROOF END CAP, ALONG WITH THE RETAINING NUT AND HEAVY WASHER. IF YOU HAVE THICKER CABIN SIDES YOU COULD USE THE END CAP ONLY, TO HOLD IT IN AND COULD ACCOMMODATE UP TO A 1 1/8 THICK SIDES. THERE IS ALSO AN APROX 3/16 SCREW HOLE ON THE OTHER SIDE. IT MEASURES APROX 4 1/2″ LONG, 3 1/4″ WIDE AND IS ABOUT 1 3/4 TALL. I JUST INSTALLED A NEW LED BULB AND IT IS REALLY BRIGHT AT 450 LUMENS, AND DRAWS APROX 2 WATTS. The item “VINTAGE HINGED BRONZE TEARDROP BOW LIGHT REWIRED LED THREADED GLASS LENS” is in sale since Thursday, January 16, 2020. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Electrical & Lighting”. The seller is “rags4jc” and is located in Morro Bay, California. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.
- Manufacturer Part Number: TEARDROP BOW LIGHT
- Brand: BRONZE