wiring | Vintage Nautical Light

Tag: wiring (page 1 of 2)

VINTAGE BRONZE/BRASS STEAMING LIGHT NEW LED WIRING GLASS LENS 9 TALL WithSTAND

June 3, 2022 / admin / Comments Off

THIS LISTING IS FOR A VINTAGE POLISHED BRONZE/BRASS? STEAMING WITH RARE BRONZE STAND. THIS HAS A NEW VERY BRIGHT 400 LUMEN LED BULB INSTALLED, WHICH ONLY DRAWS APROX 2 WATTS, GREAT TECHNOLOGY, I REMEMBER WHEN IF YOU LEFT AN ANCHOR LIGHT ON TOO LONG IT WOULD DRAIN YOUR BATTERY, YOU COULD LEAVE THIS ON FOR WEEKS WITHOUT A PROBLEM. THE NEW OLD STOCK GLASS LENS HAS THE KILBORN SAUER “K” INSIDE A CIRCLE MOLDED INTO THE TOP OF THE GLASS (SEE PHOTOS). THIS MEASURES APROX 3 1/4″ WIDE AT THE WINGS, AND STANDS ABOUT 9″ ABOVE THE MOUNTING SURFACE. PLEASE CHECK MY OTHER LISTINGS FOR ADDITIONAL BOAT HARDWARE. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Electrical & Lighting”. The seller is “rags4jc” and is located in this country: US. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

Modified Item: No
Custom Bundle: No
Manufacturer Part Number: BRONZE STEAMING LIGHT
Brand: BRASS/BRONZE
Non-Domestic Product: No

Vintage Perko Bronze Steaming Light New Wiring, Led Bulb, Lens, And Seals

January 11, 2022 / admin / Comments Off

THIS LISTING IS FOR A VINTAGE, PERKO BRONZE 225 DEGREE, CLEAR LARGE TEARDROP, BATWING DESIGN STEAMING LIGHT. AT THE TIME THIS WAS LISTED, I ALSO HAVE 2 PAIRS OF MATCHING SIDE MOUNT RUNNING LIGHT, AS WELL AS AN ASSORTMENT OF RED/GREEN BOW, AND SIDE NAVIGATION LIGHTS, ADDITIONAL STEAMING LIGHTS, AS WELL AS STERN LIGHTS. I JUST INSTALLED A NEW MODEL 1156 BULB SOCKET (VERY COMMON SIZE), AND A LOW DRAW, VERY BRIGHT LED BULB, PLASTIC LENS, AND RUBBER SEALS (PLEASE VIEW PHOTOS). IT MEASURES APROX 3 1/2″ WIDE AT THE BAT WINGS, AND PROTRUDES APROX 2 1/2″ FROM THE MOUNTING SURFACE. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Electrical & Lighting”. The seller is “rags4jc” and is located in this country: US. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

Manufacturer Part Number: 225 DEGREE STEAMING LIGHT
Brand: PERKO

Vintage Bronze Anchor/mast Light New Wiring, Led, Glass Lens Bronze Mount Patina

November 4, 2021 / admin / Comments Off

THIS LISTING IS FOR A VINTAGE BRONZE 360 DEGREE, CLEAR WHITE, MASTHEAD/ANCHOR LIGHT. THIS ONE HAS THE RIGHT AGE TO IT WITH A BEAUTIFUL PATINA. IT HAS A NEW VINTAGE OLD STOCK, KILBORN SAUER CLEAR LENS, WITH THE MOLDED “K” IN THE TOP OF THE LENS (SEE PHOTOS). AT THE TIME THIS WAS LISTED, I ALSO HAVE MANY OTHER VINTAGE LIGHTS. I JUST INSTALLED A NEW LOW DRAW, VERY BRIGHT LED BULB, AND REWIRED IT WITH A NEW BULB SOCKET (PLEASE VIEW PHOTOS). IT MEASURES APROX 7″ LONG AND IS APROX 2 1/2″ WIDE WHERE THE SCREWS ARE. The item “VINTAGE BRONZE ANCHOR/MAST LIGHT NEW WIRING, LED, GLASS LENS BRONZE MOUNT PATINA” is in sale since Thursday, September 23, 2021. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Electrical & Lighting”. The seller is “rags4jc” and is located in Morro Bay, California. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

Manufacturer Part Number: 360 DEGREE MAST/ANCHOR LIGHT
Brand: WILCOX CRITTENDEN?

VINTAGE PERKO STERN LIGHT WithRARE GLASS LENS NEW WIRING, LED, SEALS NICE PATINA

May 8, 2021 / admin / Comments Off

THIS LISTING IS FOR A VINTAGE OLD PERKO BRONZE STERN LIGHT (135 DEGREES OF VIEW). IT FEATURES A RARE GLASS LENS, NEARLY ALL OF THESE HAVE A PLASTIC LENS AND A 2 PIECE TOP HOUSING WHERE THE MOUNTING RING IS SCREWED ON UNDERNEATH OF THE TOP CAP, THIS IS AN OLDER ONE THAT IS CAST IN ONE PIECE. THE GLASS LENS IS FLAWLESS AND I’VE NEVER SEEN A GLASS LENS FOR ONE OF THESE THAT HAD “MLD 910 PERKO” MOLDED INTO THE LENS, THIS IS DEFINITELY AN OLDER ONE. THIS HAS NEW PROPER TINNED MARINE WIRING, NEW SEALS, AND A VERY BRIGHT LED BULB INSTALLED, WHICH ONLY DRAWS APROX 2 WATTS, GREAT TECHNOLOGY, I REMEMBER WHEN IF YOU LEFT AN ANCHOR LIGHT ON TOO LONG IT WOULD DRAIN YOUR BATTERY, YOU COULD LEAVE THIS ON FOR WEEKS WITHOUT A PROBLEM. IT MEASURES APROX 3 3/4″ WIDE AT THE WINGS, AND THE OVERALL HEIGHT IS ABOUT 2 1/2″ ABOVE THE MOUNTING SURFACE, THE BASE MEASURES APROX 2 1/2 DIAMETER. IT IS MARKED “PERKO” ON THE LIGHT HOUSING AND THE LENS. THIS REALLY IS A BEAUTIFUL LIGHT AND WOULD BE A GREAT ADDITION TO YOUR VINTAGE YACHT, THIS TRULY IS YACHT JEWELRY. PLEASE CHECK MY OTHER LISTINGS FOR ADDITIONAL BOAT HARDWARE. The item “VINTAGE PERKO STERN LIGHT WithRARE GLASS LENS NEW WIRING, LED, SEALS NICE PATINA” is in sale since Monday, December 21, 2020. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Electrical & Lighting”. The seller is “rags4jc” and is located in Morro Bay, California. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.

Modified Item: No
Custom Bundle: No
Manufacturer Part Number: BRONZE/BRASS STEAMING LIGHT
Brand: PERKO
Non-Domestic Product: No

VINTAGE PERKO BRASS BOW LIGHT WithFLAG SOCKET RED/GREEN GLASS LENS NEW LED WIRING

September 20, 2020 / admin / Comments Off

THIS LISTING IS FOR A SMALL VINTAGE PERKO POLISHED BRASS RED/GREEN (BLUE/GREEN) BOW LIGHT WITH FLAG SOCKET, AND SCREW IN BULB HOLDER. PERFECT FOR YOUR VINTAGE RUNABOUT. I JUST REPLACED THE OLD INCANDESCENT BULB WITH A LOW DRAW (1.7 WATT) LED BULB AND INSTALLED A NEW BULB SOCKET. IT MEASURES APROX 6 1/4″ LONG, APROX 4″ WIDE, AND STANDS APROX 3 1/4 TALL. THIS REALLY IS A BEAUTIFUL LIGHT AND WOULD BE A GREAT ADDITION TO YOUR VINTAGE VESSEL, THIS TRULY IS YACHT JEWELRY. AT THE TIME THIS WAS LISTED I HAVE OTHER VINTAGE BRASS BOAT LIGHTS, AS WELL AS BEEHIVE STERN LIGHTS, AND VINTAGE RUNNING LIGHTS, LISTED IN SEPARATE LISTINGS. PLEASE CHECK MY OTHER LISTINGS FOR ADDITIONAL VINTAGE AS WELL AS NEW BOAT HARDWARE. The item “VINTAGE PERKO BRASS BOW LIGHT WithFLAG SOCKET RED/GREEN GLASS LENS NEW LED WIRING” is in sale since Friday, August 21, 2020. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Electrical & Lighting”. The seller is “rags4jc” and is located in Morro Bay, California. This item can be shipped to United States.

Modified Item: No
Custom Bundle: No
Manufacturer Part Number: BRASS BOW LIGHT
Brand: PERKO
Non-Domestic Product: No

Solid Brass Vintage Wall Mounted Nautical Light -NEW USA WIRING POLISHED

February 10, 2019 / admin / Comments Off

Our customer service number is (574) 870.1571. Our lights come to you with all new wiring made by Westinghouse Electric that is UL Listed, so they are ready to install when you unpack them. When mounted to the wall it will extend out by about 5 inches. The wall mount is about 4 3/4 inches wide and about 1 3/4 inches tall. The two mount holes are about 4 inches on center of each other. This light measures 8 inches tall (measured from the top of the wall mount to the bottom of the globe cage). To access the bulb, spin off the cage and the glass globe drops out. This light has been re-wired, including a ground wire, with all new UL-Listed parts that are rated for any voltage under 250 volts. The bulb socket takes a normal screw in house bulb of 75 watts or less. This light weighs about 4 pounds and can be used for interior or exterior lighting projects. This is a used light that was recovered during one our many different salvage operations. It will have minor surface wear from being used on a working vessel. The item “Solid Brass Vintage Wall Mounted Nautical Light -NEW USA WIRING POLISHED” is in sale since Sunday, November 2, 2014. This item is in the category “Antiques\Maritime\Maritime Lamps & Lighting”. The seller is “big_ship_salvage” and is located in Milan, Ohio. This item can be shipped to United States.

Primary Material: Brass
Original/Reproduction: Antique Original

Small Vintage Brass Ceiling Light With Deflector Cover US WIRING

November 15, 2018 / admin / Comments Off

Our lights come to you with all new wiring made by Westinghouse Electric that is UL Listed, so they are ready to install when you unpack them. We added the 7 inch wide brass deflector cover to dress it up a little. This cast brass light will extend down from the ceiling by just about 7 inches when mounted. There are two mounting flanges on the base. The cover, cage and ribbed glass globe unscrew from the fixture as one piece. This light has been re-wired, including a ground wire, with all new UL-Listed parts that are rated for any voltage under 250 volts. The bulb holder takes a normal screw in house bulb of 75 watts or less, or you can use the newer compact fluorescent bulbs or LED lights with an Edison base. This light weighs just over 3 pounds. The original conduit holes have been fitted with threaded brass plugs and a new hole has been drilled on the top to allow the wiring to exit right into the ceiling. This is a light that was recovered during one our many different salvage operations. It will have minor surface wear from being used on a working vessel. HOW MANY LIGHTS DO YOU NEED? The item “Small Vintage Brass Ceiling Light With Deflector Cover US WIRING” is in sale since Monday, October 31, 2016. This item is in the category “Antiques\Maritime\Maritime Lamps & Lighting”. The seller is “big_ship_salvage” and is located in Milan, Ohio. This item can be shipped to United States.

Primary Material: Brass
Type: Ceiling Light

Vintage Slim Cast Brass Ceiling Light US WIRING

August 17, 2018 / admin / Comments Off

Our customer service number is (574) 870.1571. Our lights come to you with all new wiring made by Westinghouse Electric that is UL Listed, so they are ready to install when you unpack them. This light will extend down from the ceiling by 8 1/4 inches when mounted. The base measures 3 inches in diameter with three mounting legs. The original conduit opening in the front has been fitted with a brass plug. The light weighs about 2 1/2 pounds. The cage spins on and off freely. The light has been re-wired with all new UL-Listed parts that are rated for any voltage under 250 volts. We have also added a ground wire. The bulb holder takes a normal screw in house bulb of 75 watts or less, or you can use the newer compact fluorescent bulbs or LED lights with an Edison base. This is a used light that was recovered during one our many different salvage operations. It will have minor surface wear from being used on a working vessel. HOW MANY LIGHTS DO YOU NEED? The item “Vintage Slim Cast Brass Ceiling Light US WIRING” is in sale since Tuesday, November 8, 2016. This item is in the category “Antiques\Maritime\Maritime Lamps & Lighting”. The seller is “big_ship_salvage” and is located in Pauline, South Carolina. This item can be shipped to United States.

Primary Material: Brass
Type: Ceiling Light

Vintage United States Coast Guard buoy light. New socket and wiring

May 3, 2018 / admin / Comments Off

Lense has some chips but does not take away from its look or function. The item “Vintage United States Coast Guard buoy light. New socket and wiring” is in sale since Wednesday, March 14, 2018. This item is in the category “Antiques\Maritime\Maritime Lamps & Lighting”. The seller is “brian*tigger” and is located in Mount Vernon, Indiana. This item can be shipped to United States.

Country/Region of Origin: United States
Type: Buoy Light

Solid Brass Vintage Marine Nautical Wall Mounted Light ALL NEW USA WIRING

December 24, 2017 / admin / Comments Off

Our main operation is in Pauline, South Carolina. Yep, that’s right, we are here in the USA, and we speak English. Trust me, there is a lot to be said about that in today’s online trading. This wall mounted marine light has a super nice polish job. This original heavy duty cast brass nautical light was designed to mount to the wall with the glass pointing down. Some buyers have reported using designs like this on interior projects with the glass in the upright position. These lights weigh in at just under 5 pounds each. From the top of the wall mount to the bottom of the cage they measure about 10 inches long. The wall mount is 3 5/8 inches wide and has four mount holes. This light will extend out from the wall by just over 5 1/2 inches. The cage spins on and off freely. The screw in glass globe is undamaged. You can use this light inside or outside, it will never rust! We have rewired this light with a ground wire and installed a new Westinghouse UL-Listed bulb fixture that is rated for up to 250 volts, so it works just fine here in the US. The new bulb holder takes a common screw in house bulb of 75 watts or less. These are some great looking lights! Consider them for your dock or sea wall project, or even right at the front door. Unlike the lights you find at the big box store, these lights will last forever, even in that salt water location! Talk to us about our new brass adapter plate that will end all of your installation problem with any existing in the wall junction box. Your electrician will love you if you add our custom built adapter plate to this light! The item “Solid Brass Vintage Marine Nautical Wall Mounted Light ALL NEW USA WIRING” is in sale since Sunday, May 24, 2015. This item is in the category “Antiques\Maritime\Lamps & Lighting”. The seller is “big_ship_salvage” and is located in Pauline, South Carolina. This item can be shipped to United States.

Primary Material: Brass

Vintage Nautical Light