Vintage nautical sconce lights. Original finish and parts. A beautiful pair of lights. Shown lit so you can imagine how wonderful the lights will look in your home. All sides are shown. Each wall mount is 1″ x 4 3/4″ diameter. Each handle is 1 3/8 long. The milk glass shades are 3″ x 3″ diameter. No cracks or chips. The handles, fitters, and arms are chrome plated solid brass. The chrome plating is flaking in areas. The wall mounts are stamped steel. Original solid brass chrome plated caps. All joints are snug. Original medium base E-26 sockets. A bit of dirt and old paint on the backs of fixtures. No cracks, chips, or dents. Nicks, scratches, and wear to the finish you should expect. The light bulbs are not included. We also have a few other antique and vintage lights/lamps/shades listed. Look over the pictures and read the description. We sell antique, vintage, and used items. At times through an oversight our pictures/descriptions may not show or mention every single flaw. Ask questions if you have any concerns. We will try to respond within 24 hours. Your item will be packed in a sturdy box with plenty of bubble-wrap, foam, or other appropriate materials. Please send feedback upon receipt of your item. Pray for Peace on Earth. The item “Vtg Nautical Sconce Light Fixture Chrome Bathroom Shade Pair 2 Rewired USA #F95″ is in sale since Wednesday, April 1, 2020. This item is in the category “Collectibles\Lamps, Lighting\Sconces”. The seller is “sunzza” and is located in Davenport, Iowa. This item can be shipped to United States, Canada, Mexico, Bermuda.
- Country/Region of Manufacture: United States
We are licensed and insured. Why not shop where the professional designers go when they need real nautical lights?? We have removed the old wiring and bulb sockets, and installed all new wiring, including ground wires, and bulb sockets that are UL-listed, and rated to work with any voltage under 250 volts. The new bulb sockets take a common household bulb of 100 watts or less. To access the bulb, the cage spins off as well as the glass globe. From the top of the wall mount to the bottom of the cage, each light measures about 10 inches tall. Each light will extend out from the mounting surface by about 6 inches. The mounting plate is 3 3/4 inches in diameter and has four mounting holes. Each light weighs just over 5 pounds. If you have an existing junction box in the wall, ask us about our custom made adapter plates. These custom made brass plates measure 6 inches in diameter, and mount to the back of the light. It provides a finished look to your installation. These lights will have surface wear and weathering from actual use on a vessel. The globes may also need some cleaning up. The item “Set of 4 Vintage Brass Ship’s Passageway Lights” is in sale since Wednesday, July 3, 2019. This item is in the category “Antiques\Maritime\Maritime Lamps & Lighting”. The seller is “big_ship_salvage” and is located in Milan, Ohio. This item can be shipped to United States.
- Primary Material: Brass
- Original/Reproduction: Antique Original
- Type: Passageway/Bulkhead Light
THIS LISTING IS FOR A VINTAGE MM? HINGED TEARDROP POLISHED BRONZE BOW LIGHT, THIS IS NICE IN THAT IT COMES WITH A GLASS LENS. I ALSO HAVE A PAIR OF RUNNING LIGHTS IN THE SAME DESIGN FROM THE SAME BOAT IN A SEPARATE LISTING, (SEE LAST PHOTO) THIS LISTING IS ONLY FOR THE BOW LIGHT. I JUST INSTALLED A NEW BULB SOCKET, AND VERY BRIGHT LOW DRAW (2 WATT) LED BULB. THIS IS BEAUTIFULLY ENGINEERED. I HAVEN’T SEEN THIS TYPE DESIGN IN A HINGED DESIGN BEFORE AND IT OPEN/CLOSE WELL AND SCREWS DOWN TIGHT, THE SCREW IS RETAINED BY A SPECIAL WASHER ON THE INSIDE. THE GLASS LENS SCREWS IN WITH A RUBBER GASKET, WHICH SHOULD MAKE IT COMPLETELY WEATHER TIGHT ON THE EXTERIOR. THE INTERIOR MALE RECEPTACLE THAT GOES THROUGH YOUR CABIN SIDE HAS ANOTHER WEATHER TIGHT FLANGE THAT HAS A HEAVY RUBBER GROMET ON THE SEAT OF THE FEMALE END. I DON’T KNOW THAT YOU NEED A WEATHER PROOF INTERIOR SEAL BUT IF YOU WERE TO SEAL THE WIRE LEAD IN YOU WOULD HAVE IT WEATHERPROOF INSIDE AND OUT. THE TREADED PORTION THAT GOES THROUGH THE CABIN SIDE IS WIDE ENOUGH TO ACCOMMODATE UP TO 3/4 AND STILL BE ABLE T. O FIT ON THE WEATHER PROOF END CAP, ALONG WITH THE RETAINING NUT AND HEAVY WASHER. IF YOU HAVE THICKER CABIN SIDES YOU COULD USE THE END CAP ONLY, TO HOLD IT IN AND COULD ACCOMMODATE UP TO A 1 1/8 THICK SIDES. THERE IS ALSO AN APROX 3/16 SCREW HOLE ON THE OTHER SIDE. IT MEASURES APROX 4 1/2″ LONG, 3 1/4″ WIDE AND IS ABOUT 1 3/4 TALL. I JUST INSTALLED A NEW LED BULB AND IT IS REALLY BRIGHT AT 450 LUMENS, AND DRAWS APROX 2 WATTS. The item “VINTAGE HINGED BRONZE TEARDROP BOW LIGHT REWIRED LED THREADED GLASS LENS” is in sale since Thursday, January 16, 2020. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Electrical & Lighting”. The seller is “rags4jc” and is located in Morro Bay, California. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.
- Manufacturer Part Number: TEARDROP BOW LIGHT
- Brand: BRONZE